The Tilt Mounting Brackets allow accurate directional selection of the detector for optimum area coverage. These brackets movement ensure maximum effectiveness and accurate location of the detector's coverage area.
PN 40/40-001
Outline Drawings for Tilt Mount and Tilt Mount installation.
The Swivel Mounting Brackets allow accurate directional selection of the detector for optimum area coverage. These brackets allow movement up to 40º in every direction thus ensuring maximum effectiveness and accurate location of the detector's coverage area.
PN 20/20-003
The Tilt Mounting Brackets allow accurate directional selection of the detector for optimum area coverage. These brackets movement ensure maximum effectiveness and accurate location of the detector's coverage area.
PN 20/20-005
The Duct Mount allows flame detection in areas where high temperatures exist or in cases where the detector cannot be installed inside the area. It comprises a special duct mount arrangement with specific optical window to allow installation in high temperature duct applications. The mount can be used with all Spectrex 40/40 Series flame detectors.
PN 777670
For more details, refer to manual TM777670.
Outline Drawings for Duct Mount and Duct Mount installation.
The Duct Mount is designed to allow flame detection in areas where high temperatures exist or in cases where the detector can't be installed inside the area. It comprises a special duct mount arrangement with optical window and heat sink to allow installation in high temperature duct applications. This special High Temperature mount can be used with all Spectrex 20/20 Series flame detectors.
PN 794716-2
PN 794716-3
The U-bolt mount is available to facilitate either 2” or 3” pipe mounting.
Material: Stainless steel
PN 789260-1
PN 789260-2
Outline Drawings for U-Bolt / Pole Mount installation.
The Sun Protector is designed to protect the detector from direct extreme temperatures from the sun.
PN 780280
The Weather Protector is designed to protect the detector from rain and snow and direct extreme temperatures from the sun.
PN 777163
Outline Drawings for Weather Protector and Weather Protector installation - St.St. and Plastic.
The Rain Cover is designed to protect the detector from rain and snow.
PN 780981
The Rain Cover is designed to protect the detector from rain and snow.
PN 787980
Optical flame detectors' use in highly polluted or dirty areas force maintenance personnel to access the detector frequently to clean its optical window. Developed for Sharpeye 40/40 Series Optical Flame Detectors, this new air shield allows their installation under tough environmental conditions. The new air shield is suitable for use with the SharpEye 40/40 Series Optical Flame Detectors, for both the aluminum and st.st. enclosures. However, the New Air Shield is not suitable for use with the 40/40M. For more information, refer to manual TM777650.
PN 777650
Optical flame detectors are often used in highly polluted or dirty areas that force maintenance personnel to access the detector frequently and clean its optical window. The special Air Shield, developed for SharpEye optical flame detectors, allows their installation under tough environmental conditions where they may be exposed to oil vapors, sand, dust and other particulate matter.
PN 777161
Outline Drawings for Air Shield and Air Shield installation.
Does the optical detector cover the entire hazardous area that needs protection? Has the installer located the detector at the right location and does the detector's cone of vision cover the most dangerous spot?
These questions can be answered with the use of a simple tool -- the Laser Detection Area Coverage Pointer that designates the optical flame detector's area of coverage (cone of vision) on-site at the specific installation. This add-on acessory enables the designer and installer to optimize the detector's location and teh actual detection area coverage of each installed detector.
PN 787969
Optical flame detectors are often used in highly polluted or dirty areas that force maintenance personnel to access the detector frequently and clean its optical window. The special Air Shield, developed for SharpEye optical flame detectors, allows their installation under tough environmental conditions where they may be exposed to oil vapors, sand, dust and other particulate matter.
PN 20/20-787
Does the optical detector cover the entire hazardous area that needs protection? Has the installer located the detector at the right location and does the detector's cone of vision cover the most dangerous spot?
These questions can be answered with the use of a simple tool -- the Laser Detection Area Coverage Pointer that designates the optical flame detector's area of coverage (cone of vision) on-site at the specific installation. This add-on acessory enables the designer and installer to optimize the detector's location and the actual detection area coverage of each installed detector.
PN 777166
Outline Drawings for Laser Detection Area Coverage Pointer and Laser Detection Area Coverage Pointer installation.
Optical flame detectors are often used in highly polluted or dirty areas that force maintenance personnel to access the detector frequently and clean its optical window. The special Air Shield, developed for SharpEye optical flame detectors, allows their installation under tough environmental conditions where they may be exposed to oil vapors, sand, dust and other particulate matter.
PN 780960
Does the optical detector cover the entire hazardous area that needs protection? Has the installer located the detector at the right location and does the detector's cone of vision cover the most dangerous spot?
These questions can be answered with the use of a simple tool -- the Laser Detection Area Coverage Pointer that designates the optical flame detector's area of coverage (cone of vision) on-site at the specific installation. This add-on acessory enables the designer and installer to optimize the detector's location and teh actual detection area coverage of each installed detector.
PN 780909
The Spectrex Long-Range Flame Simulator allows testing of optical flame detectors in areas where real fires cannot be ignited. Testing is also mandatory in some industries to "proof test" flame detector operation and to satisfy statutory requirements.
P/N 2020-310 for IR3 flame detector
P/N 2020- 311 for UV and UV-IR flame detector
P/N 2020- 312 for Single IR flame detector
P/N 2020- 313 for Hydrogen flame detector
Outline Drawings for Long-Range Fire Simulators installation and Long-Range Fire Simulators with Beam Collimator installation.
The mini laptop, pre-loaded with Spectrex software, enables the user to re-configure settings or perform diagnostics on all flame and gas detectors series.
Refer to manual TM777070 for programming instructions when using the Mini Laptop Kit. The kit includes cable harness with RS485/232 converter. The mini laptop is programmed with maintenance winhost for all detectors' type.
PN 777820
Outline Drawings for Mini Laptop Kit installation.
The USB RS485 Harness Kit with RS485/232 converter, used with Spectrex Host software, enables the user to connect to any available PC or laptop to re-configure settings or perform diagnostics on all 40/40 and 20/20 series flame detectors.
Refer to manual TM777050 for programming instructions when using the USB RS485 Harness Kit.
P/N 794079-3 for 20/20SH, SI, CTIx, MI, ML
P/N 794079-5 for 40/40 Series
P/N 794079-6 for 20/20SI SIL Series
Outline Drawings for USB RS485 Harness installation.
